None
GY-BME/BMP280 3.3V-5V moduł czujnika temperatury i wilgotności/ciśnienia atmosferycznego
Sprawdź w chińskim sklepie
Cena
0,08 $
0,19 $
Produkt
576396766725
O produkcie
- Model GY-BME280-5V
- marka XTJ
- sortuj według koloru GY-BMP280-3.3V,GY-BMP280-5V,GY-BME280-3.3V,GY-BME280-5V
Sprzedawca 深圳市轩特佳电子
- Imię 深圳市轩特佳电子
- Sklep 深圳市轩特佳电子
- Znajduje się 广东深圳
- Opinie 0
- Pozytywnych 0
- Ocena dostaw Sprzedawcy 4,85869
- Ocena towarów Sprzedawcy 4,83966
- Ocena usług Sprzedawcy 4,84667
- 100 — 1999 шт 5000$/szt
- 2000 — 50119 шт 4000$/szt
- 50120+ шт 3000$/szt
Liczba sztuk 200 szt.
0,08
$
+ Dostawa na terenie Chin
0,37$
Produkt niedostępny
Weryfikacja + fotorelacja za 1.50$
Weryfikujemy zamówione towary i robimy fotorelację, abyś miał/a pewność, że zamówione przez Ciebie towary nie posiadają żadnych wad i są zgodne z opisem.
Dodaj usługę fotorelacji
Dostawa z Chin do Ukrainy, Uzbekistanu, krajów Unii Europejskiej.
Dostawa płatna, po przybyciu paczki do magazynu w Chinach
Zwrot towaru jest możliwy tylko wtedy, kiedy paczka znajduje się w naszym magazynie w Chinach. Po wysyłce paczki z Chin, produkty nie podlegają zwrotowi.
Zdjęcia oraz opis towaru
温馨提示:本店大部份模块只提供描述介绍或相关资料链接，没有技术咨询支持，请初学者慎拍！！！
资料下载：
GY-BME280-5V
资料链接：http://pan.baidu.com/s/1pLNoG11
GY-BMP280-5V
资料下载 https://pan.baidu.com/s/1EhTTujTBj4K70xDnoswD6Q
GY-BMP280-3.3
资料 https://pan.baidu.com/s/1slFBAdn
GY-BME280-3.3
资料下载：https://pan.baidu.com/s/13fjpsasjEcPdRtWltvTjsA
GY-BME/BMP280 -5V
5V供电
Description
ME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
BME280 Features
- Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA
- Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
- Current consumption 1.8 uA @ 1 Hz humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA in sleep mode
- Operating range -40…+85 C, 0…100 % rel. humidity, 300…1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
GY-BMP280-3.3 高精度大气压强传感器模块 高度计
散新芯片 需要全新芯片的请联系好再付款
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1
GY-BME280-3.3 高精度大气压强传感器模块 高度计
Description
ME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
BME280 Features
- Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA
- Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
- Current consumption 1.8 uA @ 1 Hz humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA in sleep mode
- Operating range -40…+85 C, 0…100 百 rel. humidity, 300…1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!
This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
The BME280 is the next-generation of sensors from Bosch, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.
